Features
Country of origin:Country where the device is made.
China
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Power over Ethernet (PoE) type supported:
PoE+
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
10000 Mbit/s
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.5
Ethernet interface type:
10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Cabling technology:Type of cable technology performance.
10GBase-T
Conductor material:
Copper
Jacket material:
Low smoke zero halogen (LSZH)
Connector contacts plating:What the connector contacts are covered with (layer on top).
Gold
Connector 1 form factor:
Straight
Connector 2 form factor:
Straight
Connector 2:This is the second connector in the device.
RJ-45
Connector 1:This is the first connector in the device.
RJ-45
Cable shielding:The protective layer for the cable, typically made of plastic.
S/FTP (S-STP)
Cable standard:The category of the cable, which is determined by performance characteristics and test requirements.
Cat6a
Cable length:How long the cable is.
10 m
General
Type:Characteristics of the device.
Networking Cables
Logistics data
Products per master (outer) case:
20 pc(s)
Master (outer) case gross weight:
13.5 kg
Master (outer) case height:
380 mm
Master (outer) case length:
350 mm
Master (outer) case width:
290 mm
Harmonized System (HS) code:
84733080
Other features
Insulation outer diameter:
1.05 mm
Packaging data
Package type:The type of product package e.g. box.
Polybag
Package weight:Weight of the packaged product.
350 g
Package height:The distance from the top to the bottom of the packaging.
290 mm
Package depth:The distance from the front to the back of the packaging.
50 mm
Package width:The distance from one side of the packaging to the other.
250 mm
Quantity per pack:The amount in each pack.
1 pc(s)
Technical details
Sustainability compliance:
Compliance certificates:
CE, REACH, RoHS
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
626 g
Height:The measurement of the product from head to foot or from base to top.
20000 mm
Depth:The distance from the front to the back of something.
11.7 mm
Width:The measurement or extent of something from side to side.
8.34 mm
