Audio
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
20 W
Number of built-in speakers:
2
Built-in speaker(s):The device contains speaker(s) to produce sound.
Design
Bezel width (top):
1.39 cm
Bezel width (side):
1.39 cm
Bezel width (bottom):
1.39 cm
Panel mounting interface:
200 x 200 mm
Orientation:
Horizontal/Vertical
Placement supported:Where the product can be placed e.g. indoor/outdoor, horizontal/vertical.
Indoor
Product design:
Digital signage flat panel
Display
Native refresh rate:
60 Hz
Display diagonal (metric):This is the size of the display screen, measured diagonally.
107 cm
Active display area (W x H):
941 x 529 mm
Pixel pitch:This is the parameter of a picture tube, which specifies the shortest distance between two dots of the same colour. The principle is: the smaller the dot pitch, the better sharpness of image.
0.245 x 0.245 mm
Display number of colours:
1.073 billion colours
Viewing angle, vertical:Maximum vertical angle at which a display can be viewed with acceptable visual performance.
178°
Viewing angle, horizontal:Maximum horizontal angle at which a display can be viewed with acceptable visual performance.
178°
Contrast ratio (typical):The difference in light intensity between the brightest white and the darkest black.
1200:1
Response time:The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)
8 ms
Native aspect ratio:The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.
16:9
HD type:Type of supported High Definition (e.g. Full HD, 4K Ultra HD).
4K Ultra HD
Display brightness:Brightness is the amount of radiating light emitted from the screen. The brightness rating is measured in candellas per square meter, commonly known as 'nits'.
500 cd/m²
Display resolution:The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.
3840 x 2160 pixels
LED backlighting type:Backlighting is the illumination of a screen e.g. LCD (liquid crystal display). There are several types of backlighting with LEDs, e.g. full array, edge lit.
Direct-LED
Display technology:The technology used in the display e.g. plasma, LED.
TFT
Display diagonal:Size of the display for this product, measured diagonally, usually in inches.
109.2 cm (43")
Features
Wall mountable:The product can be mounted on (attached to ) a wall.
General
Type:Characteristics of the device.
Signage Displays
Operational conditions
Storage relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Operating relative humidity (H-H):
20 - 80%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Packaging data
Package weight:Weight of the packaged product.
14 kg
Package height:The distance from the top to the bottom of the packaging.
680 mm
Package depth:The distance from the front to the back of the packaging.
141 mm
Package width:The distance from one side of the packaging to the other.
1070 mm
Performance
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Operating hours (hours/days):
24/7
Purpose:What the product is used for.
Corporate
Ports & interfaces
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
100 Mbit/s
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
VGA (D-Sub) input ports:Sockets in the device for VGA (D-Sub) inputs, which are sockets with 15 holes. The 15-pin VGA connector is found on many video cards, computer monitors, and high definition television sets.
1
HDMI input ports quantity:
3
HDMI ports quantity:The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
3
Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100-240 V
Energy consumption (SDR) per 1000 hours:
90 kWh
Energy efficiency class (SDR):
G
Power consumption (standby):The amount of electricity that is consumed when the product is on standby.
1 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
100 W
Technical details
Compliance certificates:
CE, RoHS
Sustainability certificates:
CE, RoHS
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
11.5 kg
Height:The measurement of the product from head to foot or from base to top.
561.2 mm
Depth:The distance from the front to the back of something.
63.5 mm
Width:The measurement or extent of something from side to side.
973 mm
