Battery
Battery recharge time:Approximate time required to recharge the battery from completely empty to completely full
8 h
Typical backup time at half load:The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is half-loaded (50% of capacity).
1.2 min
Typical backup time at full load:The amount of time that a backup energy source (e.g. UPS - Uninterruptible Power Source) can power the device for, when the backup energy source is fully loaded (100% of capacity).
0.1 min
Number of batteries supported:The number of batteries that can be used with the product.
1
Battery voltage:The voltage (V) of the battery.
12 V
Battery capacity:The amount of electric charge a battery can deliver at the rated voltage. The more electrode material contained in the cell the greater its capacity. A small cell has less capacity than a larger cell with the same chemistry, although they develop the same open-circuit voltage. Capacity is measured in units such as amp-hour (A·h).
9 Ah
Design
Form factor:The shape or design of the product.
Compact
Features
Power protection features:Features that protect the device against power problems e.g. overload.
Overcharge, Overdischarge, Overload
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
40 dB
Response time:The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)
6 ms
Surge energy rating:A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure.
156 J
Output operation voltage (max):The maximum output voltage produced by the device.
230 V
Input frequency:The frequency (Hz) which is required to power the product.
50/60 Hz
Input operation voltage (max):The maximum input voltage supported by the device.
280 V
Input operation voltage (min):The minumum voltage needed by the device during operation.
170 V
Output power:The power that the device can produce.
600 W
Output power capacity:The maximum power that the device can produce.
1 kVA
UPS topology:
Line-Interactive
Logistics data
Harmonized System (HS) code:
85078000
Ports & interfaces
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
RS-232 ports:The number of sockets (ports) for RS-232. An RS-232 serial port was once a standard feature of a personal computer, used for connections to modems, printers, mice, data storage, uninterruptible power supplies, and other peripheral devices. Now it has been largely replaced by USB and other ports.
1
USB port:Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles. USB has effectively replaced a variety of earlier interfaces, such as serial and parallel ports, as well as separate power chargers for portable devices.
AC outlets quantity:The number of sockets in the device where AC electrical power can be connected.
8 AC outlet(s)
AC outlet types:The type of outlet for AC electricity.
Type E
Weight & dimensions
Package weight:Weight of the packaged product.
7 kg
Package height:The distance from the top to the bottom of the packaging.
269 mm
Package depth:The distance from the front to the back of the packaging.
425 mm
Package width:The distance from one side of the packaging to the other.
146 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
6.4 kg
Height:The measurement of the product from head to foot or from base to top.
100 mm
Depth:The distance from the front to the back of something.
345 mm
Width:The measurement or extent of something from side to side.
200 mm
